Skip to Content

Crawlspace Encapsulation: Materials Every Contractor Should Know

Liners, tapes, dehumidifiers and more for a complete encapsulation job
November 20, 2026 by
BASIS Waterproofing Supplies, Saadullah Marufi
| No comments yet

Quick answer

A complete crawlspace encapsulation uses a reinforced vapour barrier liner (often 12 mil) on the floor, walls and piers, sealed seams and penetrations with butyl or foil tape, mechanically fastened wall edges, mould treatment before sealing, and a crawlspace dehumidifier to control humidity. Fix any water entry first.

Crawlspace encapsulation turns a damp, musty crawlspace into a clean, dry, controlled space. The quality of the result depends heavily on the materials used. Here is an overview of the core products every contractor should know before quoting an encapsulation job.

1. Vapour Barrier Liner

The liner is the heart of the system. It covers the ground and is usually run up the walls and around piers to stop ground moisture from evaporating into the crawlspace.

  • Thickness: Thicker liners, such as 12 mil, stand up better to foot traffic, stored items and service work than thin polyethylene sheeting.
  • Reinforcement: Woven or string-reinforced liners resist tearing and punctures.
  • Colour: A white or light upper surface brightens the space and makes inspections easier.
  • Roll size: Wide rolls reduce the number of seams; narrower rolls are easier to handle on walls.

We stock WhiteCap crawlspace liners in 12 mil white/white woven and green/white options, in several roll sizes.

2. Seam and Sealing Tape

A liner is only as good as its seams. Overlapping sheets should be sealed with a tape designed for vapour barriers. Butyl tape creates a strong, flexible bond between sheets and to concrete, and foil tape is useful for sealing around penetrations and ductwork. Browse our crawlspace accessories.

3. Fasteners and Wall Attachment

Where the liner runs up the foundation wall, it needs to be mechanically fastened and sealed along the top edge so it stays in place and moisture cannot get behind it. Use fasteners and termination methods suited to the wall material.

4. Dehumidification

Once a crawlspace is sealed, the air inside needs to be dried and controlled. A purpose-built crawlspace dehumidifier keeps relative humidity in check, which helps prevent condensation, mould growth and wood rot. We carry AprilAire dehumidifiers in a range of capacities, including Wi-Fi models, plus risers and accessories.

5. Mould Treatment Before You Seal

Existing mould staining on joists and subfloor should be treated before the space is encapsulated. A dedicated mould stain remover helps clean affected wood so you start the job with a clean surface.

6. Water Management

Encapsulation controls moisture; it does not stop flowing water. If the crawlspace takes on water, address it first with drainage and, where needed, a sump basin and sump pump.

Quick Checklist

  • Fix water entry and drainage problems first
  • Clean and treat mould
  • Install a reinforced liner on floor, walls and piers
  • Seal all seams and penetrations
  • Fasten and seal the top edge on the walls
  • Install a dehumidifier sized for the space

Get the Right Products for Your Next Job

Whether you are pricing a full project or restocking your trailer, our team can help you choose the right products and confirm availability and shipping across Canada. Request a quote or contact us, or browse the full catalogue.

BASIS Waterproofing Supplies
Professional waterproofing, drainage, sump pump and crawlspace products for contractors across Canada.

Sign in to leave a comment